product
|
 |
|
Customer service
|
 |
Partners
|
|
|
|
| |
|
| SCREWLOCK STANDOFFS
|
| Types:DSO, DSOS, |
 |
| Screw-lock
standoffs for mounting D-sub connectors panels;Provide a cost-effective
solution to your connector mounting requirement;Can replace
as many as ten pieces of loose hardware per connector and can
be installed ina fraction of the time.Thread sizes #4 and M3. |
| STUDS |
| Types:
FH, FHS, FH4, TFH, TFHS, HFH,
HFHS, HFHB, FHL, FHLS, |
 |
| Which
use the proven self-clinching design,install with a squeeze
in punched or drilled round holes and become permanently mounted
in the thin sheet;Thread sizes #2 to #3/8"￡?and M3 to M10 |
| PILOT PINS |
| Types:
TPS, |
 |
| Pilot
pins satisfy a wide range of positioning,pivot,and alignment
applications.The chamfered end makes mating hole location easy.Pin
diameters.#125",187",250",and3mm,4mm,5mm,6mm. |
| FLUSH NUTS |
| Types:
F,
|
 |
| Self-clinching
flush nuts are designed to be completely flush in sheets as
thin as.0.6in/1.5mm;These fasteners are ideal for applications
where a thin sheet requires load-bearing threads but still must
remains smooth,with no protrusions on either surface.Thread
sizes#4 to 1/4"and M2 to M6. |
| BROACHING NUTS |
| Types:
KF2, KFS2, |
 |
| These
nuts for pressing into PC boards offer permanent threads for
board mounting or component attachment.Thread sizes#2 to #10
and M2 to M5. |
|
|
|
